Overview
PN-FCC100 Cardboard Flat Crush Sampler is a mechanical sampling instrument designed by PNSHAR brand according to relevant standards, suitable for single-sided Corrugated Board and single-sided Corrugated Board. It can quickly and accurately cut the specified area of the sample for Corrugated Board Flat Crush Test (FCT). The instrument is an ideal auxiliary test instrument for Corrugated Board and carton production, scientific research and mass supervision and inspection departments.
Features
1. Designed for Corrugated Board Flat Crush Test (FCT).
2. Adopt a mechanical structure for reliable operation.
3. Capable of quickly and accurately cutting specimens of a specified area.
4. Applicable to Single Corrugated Board and Single Corrugated Board.
5. It is a satisfactory auxiliary device for production, scientific research and mass supervision and inspection departments.
Principle
Through its mechanical structure, the Sampler applies pressure to the Corrugated Board placed in the sampling area to cut out a circular specimen that meets the standard area (100cm ²). The cut specimen can be directly used for subsequent Flat Crush Test tests with a Compressive Strength tester such as the PN-CT300.
Applications
Corrugated Board and carton production, scientific research, mass supervision and inspection
Standards
Corrugated Board Flat Crush Test (FCT)
Steps
1. Place the Corrugated Board on the Sampler bench.
2. Operate the Sampler handle to apply pressure to the Cardboard to cut.
3. Remove the cut circular specimen of the specified area (100cm ²).
4. Place the specimen on a Compressive Strength Tester (e.g. PN-CT300) for Flat Crush Test.
Notice
• Please use in an environment with indoor temperature of 20 +/- 10 ° C and relative humidity < 85%.
• Please make sure that the instrument is clean before use, and no debris affects the cutting accuracy.
• Pay attention to safety during operation and avoid placing your hands below the cutting area.
• Regularly check the tool sharpness to ensure that the sampling edges are neat.
• This instrument is designed for single-corrugated and single-sided Corrugated Boards, do not use for Miscellaneous materials.
When the instrument is not in use, it should be kept properly to avoid bumping.