Overview
The BENTING CBPL-125BE incubator is a High Accuracy, Safe and Reliable Laboratory Equipment with Vertical Double Duct Air Jacket and Turbine Centrifugal Forced Air Supply Technology to Ensure Temperature Uniformity. It supports fixed-value operation, timed operation and automatic stop function, and is equipped with an LCD screen and touch buttons for easy operation and monitoring.
Features
1. High Accuracy Temperature Control, Temperature Fluctuation +/- 0.5 ℃, Distribution accuracy +/- 1.0 ℃.
2. Vertical double air duct forced convection design, more uniform temperature.
3. The speed-regulating fan supports the use of lightweight, fine, and powdery samples.
4. Safety features include over-rise alarm, over-rise preventer, low water level alarm, and power failure memory compensation.
5. Convenient operation, set the temperature through the special function key, and realize deviation correction and menu locking through the auxiliary menu.
6. Forced fan cooling structure to ensure that the fan operating temperature is lower than 50 ° C and prolong the service life.
Principle
The incubator adopts a dual air duct forced convection system, forced air supply through a turbocentrifugal fan, combined with PID temperature control technology, to precisely adjust the internal temperature. The speed regulating fan adjusts the wind speed according to the needs of the sample to ensure that the temperature is evenly distributed. Safety mechanisms such as over-lift preventer and power outage compensation function automatically protect equipment and experiments in abnormal situations.
Applications
Laboratory fostering, biological experiments, sample storage, scientific research and teaching
Standards
The product does not mention specific standards, please refer to the product manual or relevant certifications.
Steps
1. Turn on the power supply and turn on the device.
2. Use the touch of four buttons to set the desired temperature.
3. Select the operation mode: fixed-value operation or regular operation (0-9999 minutes).
4. Start the device and monitor the measurement and setting temperature on the LCD screen.
5. Equipment stops automatically or adjusts manually as needed.
Notice
• Power frequency is AC 220V to avoid overload.
• Check the water level before use to prevent the low water level alarm from triggering.
• Regularly clean the liner and fan to keep the equipment hygienic.
• Avoid running in a high temperature environment for a long time to prevent overheating.
• Optional accessories such as RS485 interface need to be installed by professionals.
• Do not block the exhaust port when the equipment is running to ensure that it is well ventilated.
