Overview
BENTING CBWS-70B Constant Temperature and Humidity Chamber is a foster device controlled by a 30-segment LCD program. It can provide a temperature environment of 0~ 65 ° C without humidification and 10~ 65 ° C with humidification. The humidity control range is 45%~ 90% RH. It is suitable for experiments and foster scenarios that require precise control of temperature and humidity.
Features
1. Independent humidification system for humidity control.
2. Adopt 30-segment LCD program control to support repeated step and step operation.
3. Easy to operate, support fixed-value operation, regular operation and automatic stop.
4. Equipped with dedicated function keys for temperature setting.
5. Auxiliary menu provides over-rise alarm, deviation correction, menu lock and other functions.
6. Use turbine centrifugal forced air supply to ensure uniform temperature in the box.
7. Equipped with power-off protection, parameter memory and call recovery functions.
8. The Compressor is equipped with overload protection.
9. Comprehensive safety performance, including over-lift alarm, menu lock, over-lift prevention, overload protection and power failure protection.
Principle
The equipment is heated by stainless steel heating tubes and cooled by an air-cooled airtight Compressor (refrigerant R134A) for precise temperature control. Humidity is regulated by an independent automatic humidification system. Turbine centrifugal forced air supply is used in the box to ensure uniform temperature and humidity in the working area. All parameters are set, displayed and managed by a 30-segment LCD program controller.
Applications
Microbial foster, cell foster, seed germination, material aging test, drug Stability test
Steps
1. Connect the AC220V power supply.
2. Set the required temperature and humidity parameters by tapping the button, or select the preset 30-segment program.
3. Select the operation mode, such as fixed-value operation, scheduled operation, program operation, or scheduled start.
4. Start the device, and observe the real-time measurement of temperature and set temperature through the LCD screen during operation.
5. After the operation is completed, the device can be automatically stopped according to the setting.
Notice
• When the equipment is used with humidification function, the temperature setting range should be between 10 and 65 degrees Celsius.
• Pay attention to distinguish the high temperature and low temperature fluctuations of the equipment (high temperature +/- 0.5 ° C, low temperature +/- 1 ° C).
• Humidity control has a fluctuation range of +/- 5% RH.
• This model (Type B) adopts manual defrosting structure and requires regular manual operation.
• Shelf load-bearing capacity does not exceed 15kg.
• Before use, please confirm that the Power supply voltage is AC220V and the rated current is 2.3A.
• Pay attention to the safety device of the equipment. In case of over-lift, overload, etc., it will trigger an alarm or protection.
