Overview
BENTING CDZ-100ml Electric Mantle is a temperature-regulated Electric Mantle, which is mainly used for heating laboratory liquids in colleges and universities, Petrochemicals, environmental protection and other industries. It uses high temperature resistant and alkali-free fiberglass as insulation material, seals the resistance wire in the insulation layer, and weaves it into a hemispherical internal heating heater. It has the advantages of large heating area, fast heating, good thermal insulation effect, no open flame, and not easy to bruise Glass utensils.
Features
1. Using high temperature resistant non-alkali fiberglass insulating material, resistance wire sealing in the insulating layer, woven into a hemispherical inner heat heater
2. Large heating area, fast heating, good thermal insulation effect
3. No open flame design, not easy to scratch Glass ware
4. Adopt professional non-electric shock electronic voltage regulation circuit, with long service life and wide temperature regulation range
5. With voltage regulation function, control the voltage and temperature by adjusting the knob to achieve thermostatic
Principle
This product adopts a professional electronic voltage regulation circuit without electric shock, and controls the temperature by turning the knob to adjust the voltage, so as to achieve the purpose of thermostatic. The indicator light is on or the voltmeter will change with the adjustment of the knob to achieve precise control of the heating temperature.
Applications
Colleges and universities, Petrochemicals, environmental protection and other industry laboratories
Steps
1. Slowly twist the knob to start heating, the indicator light is on or the voltmeter changes
2. At the beginning, the voltage adjustment should not be too high, and the temperature should be raised slowly
3. Adjust the voltage by adjusting the knob to control the temperature and achieve thermostatic
Notice
• When using it for the first time, slowly heat up. Turn off the power after seeing the raw white smoke, and then power on the electricity to heat up after the smoke is scattered. Repeat several times until it is officially used after power on and smoke-free.
• The sleeve cannot enter flammable, explosive, corrosive liquids or gases
• Relative working environment humidity does not exceed 85%
• The product must be grounded, dried and not damp during storage
• If there is moisture, you should pay attention to induction electricity when using it, do not touch it with your hands, and the insulation performance can be restored after drying
