Overview
BENTING CDZ-250ml Electric Mantle is a kind of equipment mainly used for liquid heating in laboratories in colleges and universities, Petrochemicals, environmental protection and other industries. It uses high temperature resistant and alkali-free fiberglass as an insulating material, seals the resistance wire in the insulating layer, and weaves it into a hemispherical internal heating heater. It has the advantages of large heating area, fast heating, good thermal insulation effect, no open flame, and not easy to scratch Glass utensils.
Features
1. Using high temperature resistant non-alkali fiberglass insulating material, resistance wire sealing in the insulating layer, woven into a hemispherical inner heat heater
2. Large heating area, fast heating, good thermal insulation effect
3. No open flame, not easy to hurt Glass ware
4. Adopt professional non-electric shock electronic voltage regulation circuit, with long service life and wide temperature regulation range
5. With voltage regulation function, thermostatic is realized by adjusting the voltage control knob
Principle
The product uses a professional electronic voltage regulation circuit without electric shock. By turning the knob to adjust the voltage and control the temperature, it can achieve the purpose of thermostatic. The indicator light is on or the voltmeter changes accordingly, and the user can adjust it intuitively. The voltage adjustment should not be too high at the beginning, and the temperature should be raised slowly to avoid damage to the heater.
Applications
Colleges and universities, Petrochemicals, environmental protection and other industry laboratories
Steps
1. Slowly twist the knob, the indicator light is on or the voltmeter changes
2. Adjust the voltage control temperature through the adjustment knob
3. At the beginning, the voltage adjustment should not be too high, and the temperature should be raised slowly
Notice
• When using it for the first time, slowly heat up. Turn off the power after seeing the raw white smoke. After the smoke is scattered, power on and heat up. Repeat several times until it is powered on and smoke-free before it can be officially used.
• The sleeve cannot enter flammable, explosive, corrosive liquids or gases
• Relative working environment humidity does not exceed 85%
The product must be grounded
• When storing, it should be dried and not damp
• If there is moisture, you should pay attention to induction electricity when using it, do not touch it with your hands, and restore the insulation performance after drying
