Overview
BENTING CDZ-3000ml Electric Mantle is a kind of laboratory liquid heating equipment, which is mainly used in laboratories in colleges and universities, Petrochemicals, environmental protection and other industries. It adopts high temperature resistant and alkali-free fiberglass insulating material, seals the resistance wire in the insulating layer, and weaves it into a hemispherical internal heating heater. It has the advantages of large heating area, fast heating, good thermal insulation effect, no open flame, and not easy to scratch Glass utensils.
Features
1. Large heating area and fast heating
2. Good thermal insulation effect
3. No open flame design
4. Glass ware not easily bruised
5. Using high temperature non-alkali fiberglass insulation material
6. Professional non-electric shock electronic voltage regulation circuit, long service life and wide temperature regulation range
Principle
The product uses a professional electronic voltage regulation circuit without electric shock. The temperature is controlled by turning the knob to adjust the voltage. The indicator light is on or the voltmeter changes accordingly to achieve thermostatic heating. Start with a slow heating to avoid damage to the heater.
Applications
Colleges and universities, Petrochemicals, environmental protection and other industry laboratories
Steps
1. Slowly twist the knob to adjust the voltage, the indicator light is on or the voltmeter changes
2. The voltage should not be too high at the beginning, and the temperature should be raised slowly
3. Remain thermostatic after reaching the desired temperature
Notice
- When using it for the first time, slowly heat up. Turn off the power after seeing the raw white smoke. After the smoke is scattered, power on and heat up. Repeat several times until it is powered on and smoke-free.
- The sleeve cannot enter flammable, explosive, corrosive liquids or gases
- Relative working environment humidity does not exceed 85%
- The product must be grounded, dried during storage, and not damp
- If there is moisture, pay attention to induction electricity when using, do not touch it with your hands, and restore the insulation performance after drying
