Overview
BENTING CDZ-20000ml Electric Mantle is a kind of equipment used for liquid heating in laboratories, mainly used in colleges and universities, Petrochemicals, environmental protection and other industries. It uses high temperature resistant and alkali-free fiberglass as an insulating material, seals the resistance wire in the insulating layer, and weaves it into a hemispherical inner heating heater. The product has the advantages of large heating area, fast heating, good thermal insulation effect, no open flame, and not easy to scratch Glass utensils.
Features
1. Using high temperature non-alkali fiberglass insulation material, resistance wire sealing in the insulating layer, woven into a hemispherical inner heat heater;
2. Large heating area, fast heating, good thermal insulation effect;
3. No open flame design, not easy to hurt Glass ware;
4. Use professional non-electric shock electronic voltage regulation circuit, which has the advantages of long service life and wide temperature regulation range.
5. With voltage regulation function, the voltage and temperature are controlled by adjusting the knob to achieve the purpose of thermostatic.
Principle
The Electric Mantle uses a professional electronic voltage regulation circuit without electric shock. By turning the knob to adjust the voltage to control the temperature, the indicator light is on or the voltmeter changes accordingly to achieve thermostatic heating. At the beginning, the voltage adjustment should not be too high, and it is necessary to slowly heat up to avoid damage to the heater.
Applications
Colleges and universities, Petrochemicals, environmental protection
Steps
1. Slowly turn the knob, the indicator light is on or the voltmeter changes, and adjust the voltage to control the temperature;
2. At the outset, the voltage adjustment should not be too high, and the temperature should be raised slowly.
3. When using it for the first time, slowly heat up. Turn off the power after seeing the raw white smoke, and then power on the electricity to heat up after the smoke is scattered. Repeat several times until it is powered on and smoke-free. It can be officially used.
Notice
1. Since the surface of the fiberglass is coated with grease, it should be slowly heated up when used for the first time. Turn off the power after seeing the raw white smoke, and heat up after powering on the smoke. Repeat several times until it is powered on and smoke-free, it can be officially used;
2. The sleeve cannot enter flammable, explosive, corrosive liquids or gases. The relative working environment humidity of this instrument does not exceed 85%;
3. This product must be grounded, dried and not damp when stored. If there is moisture, you should pay attention to induction electricity when using it, do not touch it with your hands, and its good insulation performance can be restored after drying.
