Overview
BENTING CDZ-50000ml Electric Mantle is a temperature-regulated Electric Mantle specially designed for laboratory liquid heating. It adopts high temperature resistant and alkali-free fiberglass insulating material, seals the resistance wire in the insulating layer and weaves it into a hemispherical inner heating heater. It is suitable for universities, colleges and universities, Petrochemicals, environmental protection and other industries. It has the advantages of large heating area, fast heating, good thermal insulation effect, no open flame, and no easy to bruise Glass utensils.
Features
1. Large heating area, fast heating, good thermal insulation effect
2. No open flame design, not easy to scratch Glass ware
3. Using high temperature non-alkali fiberglass insulation material
4. Hemispherical internal heating heater structure
5. Professional electronic voltage regulation circuit without electric shock, with long service life and wide temperature regulation range
Principle
The product adopts a professional electronic voltage regulation circuit without electric shock, which adjusts the temperature by adjusting the control voltage of the knob to realize thermostatic heating. When the knob is turned, the indicator light is on or the voltmeter changes, the voltage is adjusted to control the temperature, and the temperature is slowly heated to avoid damage to the heater.
Applications
Colleges and universities, Petrochemicals, environmental protection and other industry laboratories
Steps
1. Slowly twist the knob to start heating, the indicator light is on or the voltmeter changes
2. The initial voltage should not be too high, and the temperature should be raised slowly
3. Control the voltage by adjusting the knob to achieve thermostatic purposes
Notice
- When using it for the first time, slowly heat up. Turn off the power after seeing the raw white smoke. After the smoke dissipates, power on and heat up. Repeat several times until there is no smoke.
- The sleeve cannot enter flammable, explosive, corrosive liquids or gases
- Relative working environment humidity does not exceed 85%
- The product must be grounded, dried during storage, do not get wet
- If there is moisture, pay attention to induction when using, do not touch with your hands, and restore the insulation performance after drying
