Overview
The BENTING CSW-CJ-1SD Standard Workbench is a vertical single person single-sided Laminar Flow Cabinet. It is designed with a quasi-closed Glass damper to effectively isolate external airflow and odor, providing a clean environment for experimental operation. The work area is made of stainless steel and is equipped with a convenient 2KW power socket.
Features
1, vertical, quasi-closed Glass damper, can effectively prevent external air input and odor on the human body stimulation.
2. Adopt an adjustable air volume fan system to ensure that the working wind speed is always in a satisfactory state.
3. Adopt LED LCD panel control.
4. The experimental area is made of stainless steel, and the working area is equipped with a 2KW socket to provide convenience for operation.
Principle
The workbench uses the principle of vertical and one-way airflow. An internal fan system draws in air, which is purified by a high-efficiency Filter to form clean vertical laminar air that covers the entire work area. Quasi-closed Glass dampers help maintain airflow stability and prevent external contamination from entering, thus achieving and maintaining high cleanliness in the work area.
Applications
Biological experiments, microbial manipulation, cell fostering, sterility testing, precision instrument assembly
Steps
1. Turn on the power supply and lighting of the workbench.
2. Turn on the fan and bring the equipment to a stable state.
3. Before operation, the UV sterilization lamp can be turned on for disinfection in the working area, and the UV Lamp can be turned off after disinfection.
4. Adjust the Glass damper to the appropriate height and carry out the experimental operation.
5. After the operation, clean the work area and turn off the fan and power supply.
Notice
• Before use, check whether the equipment is running normally and whether the Filter is within the valid period.
• Minimize the rapid lateral movement of the arm in the work area during operation to avoid disturbing the laminar flow.
• Regular cleanliness testing and equipment maintenance.
• Pay attention to electricity safety and do not overload the power socket in the working area.
When the UV Lamp is turned on, personnel should leave the work area and avoid looking directly at the UV light source.
