Overview
DADI 101-00A type thermostatic blower drying oven has a maximum operating temperature of 300 ° C, which is suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and it is easy to operate. It can be used in industry, laboratory or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Use galvanized iron liner.
2. Equipped with double-decked large window tempered Glass observation door, you can observe the indoor situation without opening the door.
3. Adopt digital display microcomputer intelligent temperature control instrument, sensitive and accurate temperature control, with over-temperature alarm function.
4. Using thyristor output, Heating power adjustable.
5. Temperature range, 50-300 ℃.
6. The insulation layer of the box body is made of rock wool material.
Principle
The drying oven is heated by an electric heater, and the temperature is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio and is sensitive. Electrical equipment such as controllers and electric heaters are operated on the panel. A blower is installed in the studio, which promotes mechanical circulation of air and unifies the temperature of the studio.
Applications
Industrial, laboratory, and scientific research units
Steps
1. Place the test product on the test product shelf in the studio for drying.
2. Operating temperature is set by the intelligent thermostat on the panel.
3. Turn on the power supply, start the device, and the temperature control system will automatically heat up and be thermostatic.
Notice
• This box is non-explosion-proof, so do not put flammable volatile items in the drying oven to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it will cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
