Overview
DADI 101-3A type thermostatic blower drying oven has a maximum Operating temperature of 250 ° C, which is suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and the operation is simple. It can be used in industry, laboratory or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Microcomputer intelligent temperature controller, sensitive and accurate temperature control.
2. The working room is equipped with a blower to promote mechanical air circulation.
3. The box door is a double-decked tempered Glass door, which can be observed in the studio without opening the door.
4. With over-temperature alarm safety device.
5. Timer Range (0~ 9999min).
Principle
The drying oven is heated by an electric heater, and the smart temperature controller automatically adjusts the temperature according to the induction signal of the temperature sensor into the studio to realize thermostatic control. The working room is equipped with a blower to promote mechanical circulation of air and make the temperature in the box uniform.
Applications
Industrial, laboratory, and scientific research units
Steps
1. Place the sample on the shelf in the studio.
2. Operating temperature and timing time are set by the controller on the panel.
3. Turn on the power supply, start the device, and the temperature control system will automatically thermostatic to the set value.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too dense and overloaded. Miscellaneous things and samples cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise the electronic instruments in the box may be damaged.
• Do not disassemble the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
