Overview
DADI 101-4A type thermostatic blower drying oven has a maximum Operating temperature of 250 ° C, suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and it is easy to operate. It can be used in industry, laboratory or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Adopt a microcomputer intelligent temperature controller for sensitive and accurate temperature control.
2. The working room is equipped with a blower to promote mechanical air circulation.
3. The box door is a double-decked tempered Glass door, which can be observed in the studio without opening the door.
4. With over-temperature alarm safety device.
5. Controllers, electric heaters, and other electrical equipment are all operated on the panel, making it easy to operate.
6. Temperature range, from room temperature to 250 ℃.
Principle
The drying oven is heated by an electric heater, and the temperature is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio to sense the temperature, and the temperature control system adjusts according to the difference between the set value and the actual value to achieve automatic thermostatic. The working room is equipped with a blower, which can promote the mechanical circulation of air and make the temperature in the box more uniform.
Applications
Industrial, laboratory, and scientific research units
Steps
1. Place the test sample on the test sample shelf in the studio.
2. Operating temperature is set by the intelligent thermostat on the panel.
3. Turn on the power supply, start the device, and the temperature control system will automatically heat up and be thermostatic.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2, and the sample should not be placed too tightly and overloaded.
• Miscellaneous items and samples should not be placed on the heat dissipation plate, so as not to affect the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise the electronic instruments in the box may be damaged.
• Do not disassemble the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
