Overview
DADI DHG-9626A thermostatic blower drying oven has a maximum Operating temperature of 250 ° C, suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Operating temperature up to 250 ℃.
2. Using a microcomputer intelligent temperature controller, the temperature control is sensitive and accurate.
3. The working room is equipped with a blower to promote mechanical air circulation.
4. The box door is a double-decked tempered Glass observation door for easy observation.
5. The liner is made of rounded stainless steel.
6. With over-temperature alarm safety device.
7. Timer Range (0~ 9999 minutes).
8. Electrical control is centralized on the panel, making it easy to operate.
Principle
The drying oven is heated by an electric heater, and the temperature is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio to sense the temperature, and the temperature control system automatically controls the heating according to the set value to achieve thermostatic. The working room is equipped with a blower, which can promote the mechanical circulation of hot air and make the internal temperature of the studio uniform.
Applications
Industrial, laboratory, and scientific research units
Steps
1. Place the sample on the shelf in the studio.
2. Operating temperature is set by the intelligent thermostat on the panel.
3. If you need timing, set the Timer Range.
4. Start the equipment and start heating and blowing.
5. The temperature control system is automatically thermostatic, and the indoor situation can be viewed through the observation window.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it will cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
