Overview
DADI DHG-9077A thermostatic blast drying oven has a maximum Operating temperature of 250 ° C, suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1.Double-decked Large Glass Observation Door
2. Microcomputer intelligent temperature controller
3. Thyristor output
4. Over-temperature alarm
Principle
The case of the drying oven is made of thin steel plate, and there is a studio made of stainless steel or galvanized iron plate for placing the test product in the box. There is a test product shelf in the studio. The temperature is automatically adjusted by a smart temperature controller, and the temperature sensor extends into the studio to sense the temperature. All electrical equipment such as controllers and electric heaters are operated on the panel.
Applications
Industrial, laboratory, and scientific research units
Notice
• This box is non-explosion-proof, so do not put flammable volatile items in the drying oven to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it will cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
