Overview
The DADI 202-2A thermostatic blast drying oven has a maximum operating temperature of 250 ° C, which is suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote mechanical air circulation.
Features
1.Double-decked Large Glass Observation Door
2. Microcomputer intelligent temperature controller
3. Thyristor output
4. Over-temperature alarm
Principle
The drying oven is heated by an electric heater, and the temperature is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio to sense the temperature, and the controller adjusts the Heating power according to the set value. A blower is installed in the studio to promote the mechanical circulation of the air and make the temperature uniform. The box and the studio are filled with rock wool insulation.
Applications
Industrial, laboratory, and scientific research units
Steps
1. Turn on the power supply and ensure that the supply voltage matches the rated Operating voltage.
2. Operating temperature is set by microcomputer intelligent temperature controller.
3. Place the test product on the shelf in the studio, be careful not to be too dense and overloaded.
4. Start the equipment, the temperature control system will automatically heating and thermostatic.
5. The situation in the studio can be viewed through the double-decked Glass observation door.
6. After use, turn off the power.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too dense and overloaded. Miscellaneous things and samples cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it may cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
