Overview
DADI 202-3A thermostatic blower drying oven has a maximum Operating temperature of 250 ° C, suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote mechanical air circulation.
Features
1.Double-decked Large Glass Observation Door
2. Microcomputer intelligent temperature controller
3. Thyristor output
4. Over-temperature alarm
Principle
The temperature of the drying oven is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio and is sensitive. All electrical equipment such as controllers and electric heaters are operated on the panel. A blower is installed in the studio, which can promote mechanical circulation of air and achieve uniform heating.
Applications
Industrial, laboratory, and scientific research units
Steps
1. Place the test sample on the test sample shelf in the studio.
2. Operating temperature is set by microcomputer intelligent temperature controller.
3. Turn on the power supply and start the device.
4. The temperature control system automatically raises the temperature to the set value and keeps the thermostatic.
5. The working room can be observed through the double-decked Glass observation door.
Notice
• This box is non-explosion-proof, so do not put flammable volatile items in the drying oven to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it will cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
