Overview
The TAISITE 101-1A electric air blowing dryer is a laboratory drying device with a transverse wind circulation structure with an inner volume of 71L and a Temperature range of + 10 ° C to 250 ° C. The device is designed to provide uniform temperature distribution and efficient drying rates.
Features
1. The use of transverse wind circulation structure is conducive to air mixing, high space utilization, and fast drying rate.
2. Convenient operation, support fixed-value operation, regular operation and automatic stop function.
3. Special function keys to achieve temperature setting, auxiliary menu can achieve over-rise alarm, deviation correction and menu lock.
4. Forced fan cooling intake structure, so that the maximum Operating temperature of the fan is lower than 50 ℃, to ensure long-term operation.
5. Equipped with safety design, including over-lift alarm and menu lock function.
Principle
The drying oven generates heat through an internal heater (stainless steel heating tube) and is driven by a forced convection fan to form a lateral circulation airflow, so that the hot air in the working room is evenly distributed. Using PID temperature Control mode, the temperature is accurately monitored by the Pt100 temperature sensor to achieve stable temperature control.
Applications
Laboratory sample drying, material heat treatment, component aging, industrial baking, scientific research experiment
Standards
The data did not mention specific compliance criteria.
Steps
1. Turn on the power supply (AC220V).
2. Use the touch of four buttons to set the target temperature and running time (0-9999 minutes).
3. Select the operation mode: fixed-value operation or regular operation.
4. Start the device, the device will operate according to the set parameters, and automatically stop when the conditions are met.
Notice
• Operating temperature of the equipment is 250 ℃, do not use over temperature.
• The maximum load of a single shelf is 15 kg, do not overload.
• Note that the exhaust ports (rear and top) of the equipment are unobstructed.
• Before use, please confirm that the Power supply voltage is consistent with the equipment requirements (AC220V/7.3A 50/60Hz).
• Optional additional safety features, such as over-lift alarm, menu lock, etc., can be purchased to enhance the safety of use.
