Overview
TAISITE 101-2A electric air blowing dryer is a laboratory drying equipment with a transverse wind circulation structure. It has an inner volume of 136L. Temperature range is room temperature + 10 ° C to 250 ° C. It is suitable for drying and heat treatment of samples. Its design focuses on space utilization and drying efficiency.
Features
1. The use of transverse wind circulation structure is conducive to air mixing, high space utilization, and fast drying rate.
2. Easy to operate, support fixed-value operation, regular operation and automatic stop function.
3. Special function keys to achieve temperature setting, auxiliary menu can achieve over-rise alarm, deviation correction and menu lock.
4. Forced fan cooling intake structure, so that the maximum Operating temperature of the fan is lower than 50 ℃, to ensure long life and stable operation.
5. Equipped with safety functions such as over-rise alarm and menu lock.
6. Multifunctional exhaust design, with exhaust holes at the rear and overhead.
7. Optional with a variety of functions, such as RS485 interface, printer, recorder, remote control, programmed temperature control, wireless SMS alarm and U disk data storage.
Principle
The drying oven generates heat through a built-in stainless steel heating tube, which is driven by a forced convection fan to form a transverse circulation of hot air. The hot air flows evenly in the studio (liner), heating drying the items placed in it. Using the PID intelligent temperature Control system, the temperature in the box is accurately monitored by the Pt100 temperature sensor, and compared and adjusted with the set value to maintain a stable Operating temperature environment.
Applications
Laboratory sample drying, material heat treatment, industrial drying, scientific research experiment
Standards
The data did not mention specific compliance criteria
Steps
1. Turn on the power supply.
2. Set the required temperature and timing time by tapping the four buttons.
3. Select the operation mode (fixed-value operation or regular operation).
4. Start the device and start working.
5. The equipment will automatically stop after the work is completed, or automatically stop after reaching the set time.
Notice
• Power supply voltage meets requirements (AC220V) before use.
• Load per shelf (15kg).
• When the equipment is running, the exhaust port should be kept unobstructed.
• Operating temperature range to avoid overload.
• Menu lock function can be used to prevent misoperation.
• Regularly check the operating status of equipment to ensure that safety devices (such as over-lift alarms) are effective.
