Overview
TAISITE 101-1D electric air blowing dryer is a laboratory drying equipment using side air duct forced convection technology. Its Operating temperature range is room temperature + 10 ° C to 250 ° C, with an inner product of 71L, suitable for sample drying, heat treatment and other processes.
Features
1. The use of transverse wind circulation structure is conducive to air mixing, fast drying rate and high space utilization.
2. Convenient operation, support fixed-value operation, regular operation and automatic stop function.
3. Special function keys to achieve temperature setting, auxiliary menu supports over-rise alarm, deviation correction and menu lock.
4. Forced fan cooling intake structure, effectively control the fan Operating temperature to ensure the longevity of the equipment.
5. Equipped with multiple safety designs, including over-lift alarm and menu lock function.
Principle
The equipment generates heat through a stainless steel heating tube, which is driven by a forced convection system of the side air duct to form a lateral wind circulation, so that the hot air is evenly distributed in the studio (450 * 350 * 450mm). Using digital tube dual-row PID Control mode, the temperature is accurately monitored by the Pt100 temperature sensor to achieve stable temperature control.
Applications
Laboratory sample drying, material heat treatment, industrial drying
Steps
1. Connect the AC220V power supply.
2. Set the required temperature and timing time (0 to 9999 minutes) by tapping the four buttons.
3. Select the operation mode (fixed-value operation or regular operation).
4. Start the equipment and start heating and blowing.
5. After the operation, the device will automatically stop.
Notice
* The maximum shelf load of the equipment is 15kg, please do not overload.
* Power supply voltage meets equipment requirements (AC220V/7.3A 50/60Hz).
When the equipment is in operation, the exhaust port (top of the building) should be kept unobstructed.
Do not place flammable or explosive items in the equipment room.
Before performing maintenance or cleaning, be sure to disconnect the power supply.
* If there is an over-rise alarm, check the temperature setting and Sensor status.
