Overview
TAISITE 101-3D electric air blowing dryer is a laboratory equipment using side air duct forced convection technology. Its internal volume is 225L, Temperature range is room temperature + 10 ℃ to 250 ℃, and it has the characteristics of small Temperature Fluctuation and good uniformity. The equipment adopts a lateral wind circulation structure and a multi-functional control panel, which can realize convenient fixed-value operation, timing operation and automatic stop operation.
Features
1. The use of transverse wind circulation structure is conducive to air mixing, high space utilization, and fast drying rate.
2. Easy to operate, support fixed-value operation, regular operation and automatic stop function.
3. Special function keys to achieve temperature setting, auxiliary menu supports over-rise alarm, deviation correction and menu lock.
4. The forced fan cooling intake structure is adopted to ensure that the maximum Operating temperature of the fan is lower than 50 ° C to ensure long-term operation.
5. Equipped with multiple safety designs, including over-lift alarm and menu lock function.
Principle
The drying oven generates heat through a stainless steel heating tube, which is driven by the forced convection system of the side air duct to form a lateral wind circulation, so that the hot air in the working room flows evenly. The digital tube dual-row PID controller precisely adjusts the Heating power according to the feedback of the PT100 temperature sensor to achieve precise control of the temperature in the box. The forced fan cooling intake structure effectively reduces the Operating temperature of the fan.
Applications
Laboratory sample drying, material heat treatment, component aging, industrial baking, scientific research experiment
Steps
1. Turn on the power supply and turn on the power switch of the device.
2. Set the target temperature and timing time (0-9999 minutes) by tapping the four buttons.
3. Select the operation mode (fixed-value operation or regular operation).
4. Start the equipment and start heating and blowing.
5. After the operation, the equipment automatically stops, and the sample is taken out after the temperature decreases.
Notice
* Equipment should be placed in a smooth, well-ventilated environment for use.
* Load per shelf must not exceed 15kg.
* Do not open the door frequently during operation to avoid affecting Temperature uniformity.
The equipment is equipped with an over-rise alarm function. If the alarm is triggered, please check the setting parameters or the equipment status.
* Before cleaning the equipment, be sure to disconnect the power supply and allow it to chill down completely.
Non-professional personnel should not disassemble or modify the internal structure and circuitry of the equipment.
