Overview
The TAISITE WHL-65B thermostatic drying oven is a laboratory device with a wide Temperature range and high accuracy. It uses natural convection, Temperature range up to room temperature + 10 ° C to 300 ° C, Temperature resolution 0.1 ° C, Fluctuation +/- 1.0 ° C, suitable for a variety of experimental scenarios requiring thermostatic drying.
Features
1. High Accuracy Temperature Control: Temperature resolution 0.1 ℃, Fluctuation +/- 1.0 ℃, Uniformity +/- 3.5%.
2. Convenient operation: using touch four buttons to set, support fixed-value operation, regular operation and automatic stop function.
3. Safe and reliable: equipped with over-rise alarm and other safety devices, with deviation correction, menu button lock, power failure compensation and memory functions.
4. Humanized design: double-decked thermal insulation door design has good thermal insulation effect; multi-layer Shelf spacing is adjustable, which is convenient for placing items of different heights; the top is equipped with exhaust holes.
5. Durable material: The liner is made of stainless steel plate, the outer box is Cold rolled steel plate surface resistant painting, and the heating device is nickel-chromium alloy heating wire.
Principle
The drying oven generates heat through an internal nickel-chromium alloy heating wire (OCr27A17Mo2), which circulates the air in the box using natural convection. The temperature is detected by the Pt100 Sensor and fed back to the digital tube dual-column PID controller for precise adjustment to achieve the set thermostatic environment. The box uses aluminum silicate fiber as insulation material to reduce heat loss.
Applications
Laboratory sample drying, material heat treatment, component aging, industrial baking
Steps
1. Connect the AC220V power supply.
2. Set the required temperature and timing time (0-9999 minutes) by tapping the four buttons on the control panel.
3. Select the operation mode (fixed-value operation or regular operation).
4. The device starts to work and automatically enters the thermostatic state after reaching the set temperature.
5. The device will automatically stop after running, or automatically stop after waiting for the timing to end.
Notice
* The maximum Power of the equipment is 1.5Kw, please ensure that the Power supply voltage (AC220V) and line load meet the requirements.
* The maximum load of a single shelf is 15kg, do not overload items.
* The inner volume of the studio is 65L, please do not place too many items to affect the air circulation and Temperature uniformity.
Do not open and close the box door frequently during operation to avoid affecting the stability of the temperature field and causing heat loss.
Make sure that the exhaust hole at the top of the device remains unobstructed.
Please pay attention to safety when cleaning to avoid liquids entering the electrical part.
