Overview
DH209L Electric heated incubators of constant temperature is a TAISITE brand laboratory equipment with heating plate Heating mode to ensure uniform temperature distribution. The product has a mirror stainless steel liner, the outer door is carbon steel plate lame plating, and the inner door is reinforced Glass for easy observation of experimental status and cleaning and maintenance.
Features
1. Heating mode, temperature distribution is more uniform
2. Mirror stainless steel liner for easy cleaning and maintenance
3. High-end equipment with lighting, ultraviolet sterilization, over-lift prevention, inflatable port and other functions
4. Outer door carbon steel plate lame plating, inner door reinforced Glass, easy to observe the experiment
5. Convenient operation, support fixed-value operation, regular operation, and automatic stop
6. Dedicated function keys to achieve temperature setting
7. Auxiliary menu to achieve over-rise alarm, deviation correction, menu lock
8. Pull-out Shelf, easy to take samples
9. Glass inner door structure, convenient switch, comfortable feel
10. Safety devices include over-temperature alarm and over-rise preventer
Principle
Using PID Temperature Control mode, heat is generated through the heating tube heater, and the temperature in the box is evenly distributed by natural convection. The temperature sensor pt100 monitors the temperature in the box in real time, sets the target temperature by touching the four buttons, and the system automatically adjusts the Heating power to maintain the thermostatic environment.
Applications
Laboratory foster, microbial foster, cell foster, biological experiment, scientific research teaching
Standards
The product does not mention specific compliance standards
Steps
1. Connect AC 220V power supply
2. Set the target temperature by tapping the four buttons
3. Select the operation mode: fixed value operation, regular operation or automatic stop
4. Set Timer Range 0-9999 minutes (or hours)
5. Place the sample on the pull-out Shelf
6. Close the Glass Door and Start Running
7. Monitor real-time temperature through LCD display
Notice
• Power supply voltage is AC 220V before use
• Load per shelf no more than 15kg
• Regularly clean mirror stainless steel liner
• Do not frequently open and close the observation door during operation
• Pay attention to the over-temperature alarm prompt and deal with abnormal situations in time
• Turn off the power in time after use
