Overview
DH209D Electric heated incubators of constant temperature is a TAISITE brand laboratory equipment, using heating plate Heating mode to achieve uniform temperature distribution, mirror stainless steel liner for easy cleaning and maintenance. The product has fixed value operation, timing operation and automatic stop function, supports precise temperature control, and is suitable for all kinds of thermostatic foster experiments.
Features
1. Heating mode, temperature distribution is more uniform
2. Mirror stainless steel liner for easy cleaning and maintenance
3. High-end equipment with lighting, ultraviolet sterilization, over-lift prevention, inflatable port, etc
4. Outer door carbon steel plate lame plating, inner door reinforced Glass, easy to check the experimental status at any time
5. Convenient operation, fixed value operation, regular operation, automatic stop
6. Dedicated function keys to achieve temperature setting
7. Auxiliary menu, realize over-rise alarm, deviation correction, menu lock
8. Pull-out Shelf, easy to take samples
9. Glass inner door structure designed for easy switching and comfortable feel
10. Safety: over-temperature alarm, over-rise preventer
Principle
Using heating tube heating and natural convection thermostatic mode, the temperature in the box is precisely adjusted through PID temperature control technology. The temperature sensor pt100 monitors the temperature in real time, and the Control system adjusts according to the deviation between the set value and the actual value to ensure that the temperature is stable within the set range.
Applications
Laboratory foster, microbial foster, cell foster, seed germination, drug Stability testing
Steps
1. Turn on the power supply AC 220V
2. Set the target temperature by tapping the four buttons
3. Select the operation mode: fixed value operation, regular operation or automatic stop
4. Set Timer Range 0~ 9999 minutes (or hours)
5. Place the sample on the pull-out Shelf
6. Close the Glass Door and Start Running
7. Monitor the experimental status through the observation gate
8. Automatic stop after running
Notice
• Check whether the Power supply voltage meets AC 220V requirements before use
• Ensure that the exhaust port is unobstructed
• Load per shelf no more than 15kg
• Regularly clean mirror stainless steel liner
• Pay attention to whether the over-temperature alarm function is normal
• Do not use the equipment when the overlift preventer fails
• Do not open and close the door frequently during the operation of the equipment
• Disconnect the power supply when not in use for a long time
