Overview
TAISITE GP-30B drying/foster dual-use box is a laboratory equipment that integrates drying, baking, wax, heat treatment and bacterial fostering functions. It uses a vertical double air duct air jacket and a turbine centrifugal forced air supply design to ensure uniform temperature in the box, and is equipped with a PID temperature controller for High Accuracy Temperature Control.
Features
1. One box is multi-purpose, which can be used for drying, baking, melting wax, heat treatment and bacterial fostering.
2. High Accuracy, Efficiency, Safety and Wide Application.
3. Easy to operate, support fixed-value operation, regular operation and automatic stop function.
4. Adopt PID temperature controller for accurate temperature control.
5. Special function keys to set the temperature, auxiliary menu to achieve over-rise alarm, deviation correction and menu lock.
6. Vertical double air duct air sleeve combined with turbine centrifugal forced air supply, Temperature uniformity is better.
7. Speed-regulating fan design, suitable for lightweight, fine, and powdery samples.
8. Forced fan cooling intake structure to ensure that the fan operates at temperatures below 50 ° C, prolonging service life.
Principle
The equipment is heated by stainless steel heating pipe, adopts double air duct forced convection mode, and is forced by turbine centrifugal fan to circulate hot air in the working room, so as to achieve fast and uniform temperature distribution. PID temperature controller monitors and adjusts temperature in real time to ensure Stability and accuracy of temperature control.
Applications
Drying, baking, wax, heat treatment, bacterial fostering
Steps
1. Use the touch of four buttons to set the desired temperature.
2. Select the operation mode: fixed-value operation, regular operation or automatic stop.
3. Set the timer time (0-9999 minutes).
4. Start the device to run.
Notice
* Note the use of equipment Temperature range: foster RT + 5~ 80 ℃, drying 80~ 250 ℃.
* Load per shelf is 15kg, do not overload.
Equipment is equipped with an over-lift alarm safety device, please pay attention to the alarm prompt.
* Power supply voltage is AC220V/50-60Hz before use.
* There is an exhaust port (inner diameter 28mm) on the top of the equipment, please ensure smooth ventilation.
