Overview
DADI 101-5 electric thermostatic blower drying oven has a maximum operating temperature of 300 ° C, suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and it is easy to operate. It can be used in industry, laboratory or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Galvanized iron liner.
2. Double-decked large window tempered Glass observation door, you can observe the indoor situation without opening the door.
3. Microcomputer intelligent temperature controller, Temperature range RT + 50~ 300 ℃, Temperature Fluctuation +/- 1 ℃.
4. Heating power adjustable, thyristor output.
5. The working room is equipped with a blower to promote mechanical air circulation.
6. Equipped with over-temperature alarm safety device.
Principle
The drying oven is heated by an electric heater, and the temperature is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio and is sensitive. All electrical equipment such as controllers and electric heaters are operated on the panel. A blower is installed in the studio, which can promote mechanical circulation of air and make the temperature even in the studio.
Applications
Baking, drying, heat treatment, industrial, laboratory, scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Place the sample on the shelf of the studio.
2. Turn on the power supply and ensure that the supply voltage matches the rated Operating voltage.
3. Operating temperature is set by microcomputer intelligent temperature controller.
4. Start the device, the temperature control system will automatically thermostatic to the set temperature.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too dense and overloaded. Miscellaneous things and samples cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it may cause damage to the electronic instruments in the box.
• Do not disassemble the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
