Overview
DADI DHG-9056 electric thermostatic blower drying oven has a maximum Operating temperature of 300 ° C, suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and it is easy to operate. It can be used in industry, laboratory or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Mirror rounded corner stainless steel liner.
2. Equipped with double-decked large window tempered Glass observation door, you can observe the indoor situation without opening the door.
3. Adopt microcomputer intelligent temperature control instrument, sensitive and accurate temperature control, and have over-temperature alarm function.
4. Temperature Fluctuation is small (+/- 1 ℃), Temperature Uniformity is good （≤ +/- 2.5%).
5. Heating power is adjustable, using thyristor output.
Principle
The drying oven is heated by an electric heater and the temperature is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio and is sensitive. The working room is equipped with a blower, which promotes the mechanical circulation of the air and makes the temperature in the box uniform. All electrical equipment such as controllers and electric heaters are operated on the panel.
Applications
Industrial, laboratory, and scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Turn on the power supply to ensure that the power supply voltage is consistent with the rated Operating voltage of the box (220V 50Hz).
2. Operating temperature (RT + 50~ 300 ℃ range) set by microcomputer intelligent temperature controller.
3. Place the items to be processed on the test shelf in the studio, be careful not to be too dense and overloaded.
4, start the equipment, the temperature control system will automatically heating and thermostatic at the set value.
5. Internal conditions can be observed through double-decked tempered Glass doors during work.
6. After the work is completed, turn off the power supply.
Notice
● This box is non-explosion-proof type, do not put flammable volatile items into the drying oven to avoid explosion.
The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
● When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it may cause damage to the electronic instruments in the box.
Do not dismantle or unload the machine parts at will to avoid damage to the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician familiar with electronic instruments.
