Overview
DADI DHG-9076 electric thermostatic blower drying oven has a maximum operating temperature of 300 ° C, suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote mechanical air circulation.
Features
1. Mirror rounded corner stainless steel liner.
2. Equipped with double-decked large window tempered Glass observation door, you can observe the indoor situation without opening the door.
3. Adopt a microcomputer intelligent temperature controller for sensitive and accurate temperature control.
4, with over-temperature alarm safety device.
Temperature Fluctuation is small (+/- 1 ℃), good uniformity （≤ +/- 2.5%).
6. Heating power is adjustable, using thyristor output.
Principle
The drying oven generates heat through an electric heater, and the intelligent temperature controller automatically adjusts the Heating power according to the feedback of the temperature sensor to achieve accurate temperature control. The working room is equipped with a blower, which can promote the mechanical circulation of air and make the temperature in the working room more uniform.
Applications
Industrial, laboratory, and scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Place the test product on the shelf in the studio, be careful not to be too dense and overloaded.
2. Turn on the power supply to ensure that the power supply voltage is consistent with the rated Operating voltage of the box.
3. Operating temperature is set by microcomputer intelligent temperature controller.
4, start the equipment, the temperature control system will automatically heat up and thermostatic.
5. The internal situation can be observed through the double-decked Glass Door during the working process.
6. After the work is completed, turn off the power supply.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it will cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
