Overview
DADI DHG-9626 electric thermostatic blower drying oven has a maximum Operating temperature of 300 ° C, suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and it is easy to operate. It can be used in industry, laboratory or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Mirror rounded corner stainless steel liner.
2, double-decked large window tempered Glass observation door.
3. Microcomputer intelligent temperature controller, over-temperature alarm.
4. Temperature range 50-300 ℃.
5. Temperature Fluctuation +/- 1 ℃, Uniformity ≤ +/- 2.5%.
6. Heating power adjustable, thyristor output.
Principle
The drying oven is heated by an electric heater, and the temperature is automatically adjusted by a smart temperature controller. The temperature sensor extends into the studio and is sensitive. The working room is equipped with a blower, which promotes the mechanical circulation of the air and makes the temperature in the box uniform. All electrical equipment such as controllers and electric heaters are operated on the panel.
Applications
Baking, drying, heat treatment, industrial, laboratory, scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Place the test product on the shelf in the studio.
2. Turn on the power supply to ensure that the power supply voltage is consistent with the rated Operating voltage.
3. Operating temperature is set by microcomputer intelligent temperature controller.
4, start the device, the temperature control system will automatically thermostatic to the set value.
Notice
• This box is non-explosion-proof, so do not put flammable volatile items in the drying oven to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it will cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
