Overview
DADI 202-1 electric thermostatic drying oven has a maximum operating temperature of 300 ° C. It is suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and it is easy to operate. It can be used in industry, laboratories or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Operating temperature up to 300 ℃.
2. The temperature control system is sensitive and accurate, and the temperature can be set arbitrarily and automatically thermostatic.
3. The working room is equipped with a blower to promote mechanical air circulation.
4. The box door is a double-decked tempered Glass door, which can be observed in the studio without opening the door.
5. The smart temperature controller is used to automatically adjust the temperature, and the temperature sensor extends into the studio and is sensitive.
6. Controllers, electric heaters, and other electrical equipment are all operated on the panel, making it convenient and fast.
Principle
The drying oven is heated by an electric heater, and the smart temperature controller automatically adjusts the Heating power according to the temperature sensor signal extending into the studio to maintain the set Operating temperature. A blower is installed in the studio to promote mechanical circulation of air to ensure uniform temperature in the box.
Applications
Industrial, laboratory, and scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Place the drying oven in a smooth, well-ventilated environment.
2. Confirm that the supply voltage is consistent with the rated Operating voltage of the box (220V 50Hz).
3. Open the box door and place the items to be processed on the test shelf. Be careful not to place them too close and overloaded.
4. Close the box door and set the required Operating temperature through the intelligent temperature controller on the panel.
5. Turn on the power switch and start the drying oven for heating.
6. The working room can be observed through the double-decked tempered Glass door.
7. After the work is completed, turn off the power supply and wait until the temperature in the box drops to a safe range before opening the box door to remove the items.
Notice
• This box is non-explosion-proof, do not put flammable volatile items into the drying oven to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box (220V 50Hz), otherwise it may cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
