Overview
DADI 202-2 electric thermostatic drying oven has a maximum operating temperature of 300 ° C, which is suitable for baking, drying, heat treatment and other heating. The product structure is precise, the temperature control is sensitive and accurate, and the operation is simple. It can be used in industry, laboratories or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Operating temperature up to 300 ℃, Temperature range.
2. The smart temperature controller is used to automatically adjust the temperature, and the temperature control is sensitive and accurate.
3. The working room is equipped with a blower, which promotes the mechanical circulation of air, and the Temperature Uniformity ≤ +/- 3.5%.
4. The box door is a double-decked tempered Glass door, which can be observed in the studio without opening the door.
5. Controllers, electric heaters, and other electrical equipment are all operated on the panel, making it easy to operate.
Principle
The drying oven is heated by an electric heater, and the temperature sensor extends into the studio to sense the temperature and transmit the signal to the smart temperature controller. The temperature controller automatically adjusts the Heating power according to the difference between the set value and the actual value to achieve thermostatic control. At the same time, the blower installed in the working room promotes the mechanical circulation of hot air to ensure the uniformity of the temperature in the box.
Applications
Industrial, laboratory, and scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Place the drying oven in a suitable position to ensure that the power supply voltage matches the rated Operating voltage (220V 50Hz).
2. Open the box door and place the items to be processed on the test shelf, taking care not to be too dense and overloaded (the average load is 45KG/M2).
3. Close the box door and set the required Operating temperature (RT + 50~ 300 ℃) through the intelligent temperature controller on the panel.
4. Turn on the power, start the device, the temperature control system will automatically heat up and thermostatic at the set value.
5. Internal conditions can be observed through double-decked tempered Glass doors during work.
6. After the work is completed, turn off the power supply and wait until the temperature in the box drops to a safe range before removing the items.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it may cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
