Overview
DADI DHG-9027 electric thermostatic drying oven has a maximum operating temperature of 300 ° C, which is suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Adopt stainless steel liner.
2. Equipped with double-decked large window tempered Glass observation door, you can observe the indoor situation without opening the door.
3. Adopt digital display, thyristor output, and have over-temperature alarm function.
4. Temperature range is 50-300 ℃.
Temperature control is sensitive and accurate, Temperature Fluctuation is +/- 1 ℃, Temperature Uniformity ≤ +/- 3.5%.
6. The structure design is reasonable, and the electrical equipment operation panel is centralized, making it easy to use and maintain.
Principle
The drying oven is heated by an electric heater, and the smart temperature controller automatically adjusts the Heating power according to the feedback signal of the temperature sensor (extending into the studio) to achieve accurate temperature control. A blower is installed in the studio, which can promote the mechanical circulation of the air and make the temperature in the box more uniform. After the user sets the target temperature, the temperature control system can automatically thermostatic.
Applications
Industrial, laboratory, and scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Place the drying oven in a smooth and well-ventilated environment.
2. Connect the power supply to ensure that the power supply voltage is consistent with the rated Operating voltage of the box (220V 50Hz).
3. Turn on the power switch.
4. Operating temperature set by smart thermostat (range: RT + 50~ 300 ℃).
5, according to the need, can be placed on the shelf in the working room, pay attention to the average load does not exceed 45KG/M ², and placed not too dense.
6, start the heating and blast function, the equipment will automatically heat up and thermostatic at the set value.
7. Internal conditions can be observed through double-decked Glass doors during work.
8. After the work is over, turn off the power switch and take out the items after the box is chilled down.
Notice
• This box is non-explosion-proof, and it is strictly forbidden to put flammable volatile items into the drying oven to avoid explosion.
• The average load of the test shelf is 45KG/M ². Do not place the test product too close and overloaded. The test product and Miscellaneous items cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box (220V 50Hz), otherwise the electronic instruments in the box may be damaged.
• Do not disassemble the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician familiar with electronic equipment.
