Overview
DADI DHG-9057 electric thermostatic drying oven has a maximum operating temperature of 300 ° C, which is suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. Operating temperature can be raised from room temperature to the highest temperature, which can be set arbitrarily within this range. After setting, the temperature control system can be automatically thermostatic, and the working room is equipped with a blower, which can promote air mechanical circulation.
Features
1. Operating temperature up to 300 ℃.
2. The smart temperature controller is used to automatically adjust the temperature, and the temperature control is sensitive and accurate.
3. The studio adopts stainless steel liner, which is resistant to corrosion.
4. The box door is a double-decked large window tempered Glass door, which is convenient for observing the situation in the working room.
5. The working room is equipped with a blower to promote mechanical air circulation and uniform temperature.
6. With over-temperature alarm safety device.
7. Controllers, electric heaters, and other electrical equipment are all operated on the panel, making it easy to use.
Principle
The drying oven is heated by an electric heater, and the temperature is automatically adjusted by the smart temperature controller according to the feedback of the temperature sensor. A blower is installed in the studio, which promotes the mechanical circulation of air and makes the temperature inside the studio more uniform. After the user sets the target temperature, the temperature control system can automatically thermostatic.
Applications
Industrial, laboratory, and scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Turn on the power supply to ensure that the power supply voltage is consistent with the rated Operating voltage of the box (220V 50Hz).
2. Operating temperature is set by the intelligent thermostat on the panel.
3. Place the items to be processed on the test shelf in the studio, be careful not to be too dense and overloaded.
4. Close the box door and start the device to work.
5. The working room can be observed through the double-decked tempered Glass door.
6. After the work is completed, turn off the power and remove the items.
Notice
● This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
The average load of the sample shelf is 45KG/M ², do not place the sample too dense and overloaded, while the heat dissipation plate can not be placed on the sample and Miscellaneous things to avoid affecting the convection of hot air.
● When using this box, the power supply voltage must be consistent with the rated Operating voltage of this box (220V 50Hz), otherwise it may cause damage to the electronic instruments in the box.
Do not disassemble the parts arbitrarily to avoid damaging the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician familiar with electronic instruments.
