Overview
DADI DHG-9077 electric thermostatic drying oven has a maximum operating temperature of 300 ° C, which is suitable for baking, drying, heat treatment and other heating. The product has a precise structure, sensitive and accurate temperature control, and is easy to operate. It can be used in industry, laboratories or scientific research units. The drying oven Operating temperature can be raised from room temperature to the highest temperature. Operating temperature can be set arbitrarily within this range, and the temperature control system can be automatically thermostatic after setting.
Features
1. The working room is equipped with a blower, which can promote mechanical air circulation.
2. The box door is a double-decked tempered Glass door, which can be observed in the studio without opening the door.
3. The temperature is automatically adjusted by a smart temperature controller, and the temperature sensor extends into the studio, which is sensitive.
4. Controllers, electric heaters, and other electrical equipment are all operated on the panel.
5. The control room has a side door that can be removed for inspection or repair of the wiring.
Principle
The shell of the drying oven is made of thin steel plate. There is a studio made of stainless steel or galvanized iron plate for placing the test product in the box. There is a shelf of the test product in the studio, and the test product can be placed on it for drying. There is a rock wool insulation layer of considerable thickness between the studio and the shell of the box. Heating is carried out by an electric heating device and automatically adjusted by an intelligent temperature controller according to the feedback of the temperature sensor to maintain the set temperature in the working room.
Applications
Industrial, laboratory, and scientific research units
Standards
JB/T5520-91、JB/Z339-89
Steps
1. Place the drying oven in a stable and well ventilated position.
2. Confirm that the supply voltage is consistent with the rated Operating voltage of the box (220V 50Hz).
3. Open the box door and place the items to be processed on the test shelf. Be careful not to be too dense and overloaded. Items cannot be placed on the heat dissipation plate.
4. Close the box door and set the required Operating temperature (range: RT + 50~ 300 ℃) through the intelligent temperature controller on the panel.
5. Turn on the power switch, start the equipment, and the temperature control system will automatically heat and thermostatic.
Notice
• This box is non-explosion-proof, do not put in flammable volatile items to avoid explosion.
• The average load of the sample shelf is 45KG/M2. Do not place the sample too tightly and overloaded. At the same time, the sample and Miscellaneous things cannot be placed on the heat dissipation plate to avoid affecting the convection of hot air.
• When using this box, the power supply voltage must match the rated Operating voltage of this box, otherwise it will cause damage to the electronic instruments in the box.
• Do not dismantle or unload the parts arbitrarily, so as not to damage the electrical wiring in the box.
If the box malfunctions, it should be repaired by an electrician who is familiar with electronic equipment.
