Overview
TAISITE GX65B Hot Air Sterilizer is a vertical dual air duct forced convection type sterilizer with 65L inner volume, stainless steel liner and Cold rolled steel plate outer box. The device sterilizes quickly, safely and reliably through hot air, and is easy to operate. It supports set-value operation, timing operation and automatic stop function.
Features
1.Quickly, safely and reliably sterilize.
2. Convenient operation, support fixed-value operation, regular operation, and automatic stop.
3. Dedicated function keys to achieve temperature setting.
4. Auxiliary menu to achieve over-rise alarm, deviation correction, menu lock.
5. Vertical double air duct air jacket, turbine centrifugal forced air supply, more uniform temperature.
6. Speed-regulating fans enable the use of lightweight, fine, and powdery samples.
7. Forced fan cooling intake structure, the fan maximum Operating temperature < 50 ℃, long life operation.
8. LCD multi-data control panel (BE model): multi-data full-screen operation, power outage memory, power outage compensation.
9. Multifunctional safety lock.
10. Linear dispersion diagram of temperature rise in furnace.
11. Insulation safety door design, standing around the instrument during operation is not hot.
Principle
The equipment adopts dual air duct forced convection mode, and the hot air is forced to circulate inside the studio through the turbo centrifugal fan to ensure uniform temperature distribution. The heating element is stainless steel heating pipe, and the temperature control adopts digital tube double row PID mode to achieve accurate temperature control. The speed regulating fan can adjust the wind speed according to the characteristics of the sample, which is suitable for a variety of Sample types.
Applications
Laboratory sterilizing, medical apparatus disinfection, sample drying, material heat treatment
Steps
1. Connect the AC 220V power supply.
2. Set the required temperature and time (0 to 9999 minutes) by tapping the four buttons.
3. Select the fixed-value operation or the timing operation mode.
4. Start the device, and the device will automatically run until the set conditions stop.
Notice
* Power supply voltage is AC 220V before use.
When the device is running, do not touch the internal high-temperature components.
* Load per shelf no more than 15kg when placing samples.
* Do not block the top φ 28mm exhaust port.
The equipment has an over-lift alarm function. If there is an alarm, please check it in time.
* Please disconnect the power supply when cleaning and wipe with a soft cloth.
Non-professional personnel should not disassemble or repair the equipment.
