Overview
TAISITE WPL-65BE Electric heated incubators of constant temperature is a vertical foster device with dual air duct forced convection thermostatic mode. Temperature range is + 5 ° C to 80 ° C, Temperature Fluctuation is +/- 0.5 ° C, Temperature Uniformity is +/- 1.0 ° C. It has the characteristics of High Accuracy, Efficiency, Safety and Wide Temperature range. The product has a variety of operation functions such as fixed value operation, timing operation, automatic stop, and supports a variety of optional functions to meet different experimental needs.
Features
1. High Accuracy Temperature Control: Temperature resolution 0.1 ℃, Temperature Fluctuation +/- 0.5 ℃, Temperature distribution accuracy +/- 1.0 ℃.
2. Convenient operation: touch four buttons to set, LCD dual-column PID control, support fixed-value operation, regular operation, and automatic stop.
3. Multifunctional auxiliary menu: realize over-rise alarm, deviation correction, menu locking and other functions.
4. Efficient and uniform heating: using vertical double air duct air sleeve structure, turbine centrifugal forced air supply to ensure uniform temperature.
5. Wide applicability: Equipped with a speed-regulating fan, it can be used for lightweight, fine, and powdery samples.
6. Safe and reliable: with over-lift preventer, power failure memory, power failure compensation function, forced fan cooling intake structure to make the fan Operating temperature below 50 ℃.
7. Durable design: The liner is made of stainless steel plate, the outer box is Cold rolled steel plate surface resistant painting, and the heat insulation material is polyurethane.
8. Thickened safety door design: reduce heat dissipation and improve experimental comfort.
Principle
The incubator is heated through a stainless steel heating pipe and adopts a liquid crystal dual-row PID Control system for precise temperature adjustment. The built-in turbo centrifugal fan forces air supply to form a double air duct forced convection, which circulates hot air in the box to ensure uniform and stable temperature. The speed regulating fan can adjust the wind speed according to the characteristics of the sample, and force the fan to dissipate heat and intake structure to effectively control the fan Operating temperature. The system monitors the temperature in the box in real time through the Pt100 temperature sensor and compares it with the set value. The heating device is controlled by the PID algorithm to realize thermostatic foster.
Applications
Microbial foster, cell foster, seed germination, material aging test, environmental test, food inspection, drug Stability test, scientific research and teaching
Steps
Connect the power supply (AC 220V/2.3A 50/60Hz).
2. Use the touch of the four buttons on the control panel to set the target temperature and timing time (0-9999 minutes).
3. Select the operation mode (fixed-value operation or regular operation).
4. Start the equipment, the system starts heating and forced convection cycle.
5. During operation, the real-time temperature measurement can be viewed at the upper level of the LCD screen, and the set temperature can be viewed at the lower level.
6. At the end of operation, the device can be automatically stopped according to the settings.
7. After use, turn off the power.
Notice
* Equipment should be placed in a stable, well-ventilated environment.
* Do not put flammable, explosive or corrosive items in the box.
* The maximum load of a single shelf is 15kg, do not overload.
* During operation, do not frequently open and close the box door, so as not to affect the temperature Stability.
* When cleaning, please disconnect the power supply, wipe with a soft cloth, and avoid the use of corrosion cleaners.
* If you need to use the exhaust port (top, inner diameter 28mm), please ensure that the exhaust is unobstructed.
Equipment is equipped with safety devices such as overlift preventers, but it is still necessary to regularly check whether its function is normal.
* When performing deviation correction or menu locking, please refer to the instructions.
Optional functions (e.g. program temperature control, external communication, etc.) need to be configured separately.
* Please pay attention to safety when handling, Net weight 43kg.
