Overview
TAISITE HS1300 Laminar Flow Cabinet is a double person single-sided horizontal purification equipment with air flow direction from back to front, providing a 100-level clean working environment. It is equipped with stainless steel interior and Cold rolled steel plate exterior, and equipped with LED controller, which is suitable for laboratories and other places that require high cleanliness.
Features
1. Low-noise design, touch button operation, support multi-level wind speed adjustment.
2. Horizontal air supply mode, stable airflow.
3. The F-free series features an integrated structure and LED indicator controller.
4. The -F series is a detachable split structure with LED indicator controller, and the -FS series is a detachable split structure with LCD intelligent controller.
5. The split structure can be placed on the platform alone for use.
6. Reinforced Glass and Quasi-Closed Table Design to Effectively Prevent External Air Flow.
Principle
Laminar Flow Cabinet drives the air through the fan through the initial effect and HEPA Filter to remove more than 99.9% of the particles above 0.5um, forming a horizontal airflow flowing from the back to the front, maintaining the 100-level cleanliness of the working space and ensuring a sterile operating environment.
Applications
Laboratory, biopharmaceutical, electronics manufacturing, medical research
Standards
Cleanliness level 100, collection efficiency of 0.5um particles above 99.9%, colony number ≤ 0.5/dish
Steps
1. Turn on the power supply and turn on the controller switch.
2, according to the need to adjust the wind speed to 0.2-0 m/sec range.
3. Turn on the UV Lamp for disinfection.
4. Start the fan and confirm that the airflow is normal before starting the operation.
5. Turn off the power supply of the equipment after the operation is completed.
Notice
• The load-bearing capacity of the working surface shall not exceed 50kg.
• Regularly check Filter efficiency to ensure collection performance.
• Avoid use in environments where the vibration half peak exceeds 3um.
• Confirm that the horizontal adjustment foot is stable before use.
• Power supply voltage is AC220V to prevent overload.
