Overview
TAISITE GZX300E light Chamber is a thermostatic foster device with three-sided lighting design, suitable for experiments in non-humidified (0~ 65 ℃) or humidified (10~ 65 ℃) environments. The device adopts 30-segment LCD program control, with fixed-value operation, timing operation, program operation and other modes, and is equipped with a forced convection system to ensure uniform temperature in the box.
Features
1. Adopt stable high luminous flux Illuminant, provide three-sided light, Illumrination degree 0-15000Lx six-level adjustable to ensure Illuminant stability.
2. Adopt 30-segment LCD program control, support repeated step-by-step and step-by-step operation, easy to operate, and can realize fixed-value operation, regular operation and automatic stop.
3. Equipped with special function keys for temperature setting, and has auxiliary menus to realize over-rise alarm, deviation correction, menu lock and other functions.
4. Adopt turbine centrifugal forced air supply system to make the temperature distribution more uniform. With power-off protection, parameter memory, and call recovery functions.
5. With loop self-diagnosis function, it can alarm Sensor fault and upper and lower limit overtemperature.
6. With intelligent defrosting, monitoring and timekeeping functions, and the use of brand Compressors.
7. Comprehensive safety protection, including over-lift alarm, menu lock, over-lift prevention, overload protection, and power failure protection.
8. Design user-friendly, the rear panel can be opened, easy to observe the situation inside the box.
Principle
The light Chamber is cooled by an Air-Cooled closed Compressor and R134A refrigerant, with stainless steel heating pipes for heating, and is precisely regulated by a 30-segment program controller to achieve the set temperature Linear dispersion. A turbine centrifugal forced air supply system is used in the box to ensure uniform temperature distribution. The lighting system provides stable and adjustable three-sided lighting to create the required lighting conditions for the foster.
Applications
Plant fostering, seed germination, microbial fostering, tissue fostering, biological product research
Standards
No specific compliance criteria were mentioned in the data.
Steps
1. Connect the AC 220V power supply.
2. Set the required temperature, Illumrination degree and running program by tapping the button.
3. Select the operation mode (e.g. fixed-value operation, scheduled operation, or program operation).
4. Start the device, the system will operate according to the set parameters, and the real-time temperature and set temperature can be monitored through the LCD screen.
5. After the operation is completed, the device can be automatically stopped according to the setting.
Notice
• Equipment should be used within the specified Humidity range, 0~ 65 ° C without humidification, 10~ 65 ° C with humidification.
Please note that the power requirements are AC 220V/5.0A 50/60Hz to ensure that the power supply matches.
• The single-layer load-bearing capacity of the shelf does not exceed 15kg.
• During operation, if safety devices such as over-rise alarm and overload protection are triggered, please check and troubleshoot in time.
• The device has a menu lock function to prevent misoperation.
The rear panel of the device can be opened for observation, but non-professionals should not disassemble the internal components without authorization.
The equipment has power outage memory and compensation functions, and can resume operation after an incoming call, but it is still recommended to take additional protective measures in important experiments.
