Overview
TAISITE GZX250EF light Chamber is a 250L volume laboratory equipment, using 4-sided lighting design, Illumrination degree 0-20000Lx six-level adjustable. It has 30-segment LCD program control function, which can realize fixed-value operation, timing operation, program operation and other modes. The temperature control range is 0-65 ° C (without humidification) or 10-65 ° C (with humidification), and the temperature is uniform and stable.
Features
1.4-sided lighting design, more uniform lighting, Illumrination degree 0-20000Lx six adjustable.
2.30-Segment LCD program control, supports repeated step-by-step and step-by-step operation.
3. There are various operating modes, including fixed-value operation, regular operation, automatic stop/appointment start, and program operation.
4. With auxiliary menu function, it can realize deviation correction, menu button lock, power failure compensation and memory.
5. Using turbine centrifugal forced air supply system, Temperature uniformity up to +/- 1.5 ℃.
6. Multiple Safety protection: over-rise alarm, overload protection, circuit self-diagnosis, upper and lower limit over-temperature alarm, power-off protection.
7. Intelligent defrosting function, automatic operation.
8. The brand Air-Cooled closed Compressor is used, and the refrigerant is R134A.
9. Humanized design, the rear panel can be opened for easy observation and maintenance.
Principle
The light Chamber achieves uniform temperature in the box through forced convection. It uses stainless steel heating pipe heating, Air-Cooled closed Compressor cooling, and the temperature is precisely controlled by a 30-segment program controller. The lighting system provides 4-sided Illuminant and controls the light intensity through six-level adjustment. The controller automatically manages the heating, cooling, lighting and defrosting processes according to the setting program or set value to ensure a stable foster environment.
Applications
Plant fostering, seed germination, microbial fostering, tissue fostering, environmental testing
Standards
The data did not mention specific compliance criteria.
Steps
1. Turn on the power supply.
2. Set the temperature, Illumrination degree and running program by tapping the button (support 30 program settings).
3. Select the operation mode, such as fixed-value operation, regular operation, or program operation.
4. Set the timer time (0~ 99.9 hours, 30 segments can be set).
5. Start the device and start running.
6. During operation, the measured temperature and the set temperature can be observed through the LCD display.
7. When the run is over or needs to be stopped, press the corresponding function key to operate.
Notice
• Please ensure that the power supply is AC 220V and matches the rated current.
Equipment should be placed in a well-ventilated place.
• Please make sure the door is closed before running.
• Do not exceed the maximum load-bearing capacity of the Shelf (15kg).
• The equipment has multiple alarm functions. If there is an alarm prompt, please check the fault according to the code.
Disconnect the power supply before cleaning or maintenance.
• If it is not used for a long time, it is recommended to disconnect the power supply.
