Overview
TAISITE GZX300EF light Chamber is an intelligent foster equipment with a volume of 300L, using a 4-sided lighting design, Illumrination degree 0-20000Lx six-level adjustable. The product adopts 30-segment LCD program control, with fixed-value operation, timing operation, program operation and other modes, and is equipped with a turbine centrifugal forced air supply system to ensure uniform temperature in the box. Temperature range is 0~ 65 ℃ (no humidification) or 10~ 65 ℃ (humidification). Temperature control accuracy is high. Fluctuation is +/- 1 ℃ and uniformity is +/- 1.5 ℃.
Features
1. 4-sided lighting design, more uniform lighting, Illumrination degree 0-20000Lx six adjustable.
2.30-Segment LCD program control, supports complex programs such as repeated stepping and step operation.
3. Easy to operate, support fixed-value operation, regular operation, automatic stop/reservation start, program operation and other modes.
4. Equipped with dedicated function keys and auxiliary menus to achieve temperature setting, deviation correction, menu locking and other functions.
5. Adopt a turbine centrifugal forced air supply system for more uniform temperature distribution.
6. Safety protection with multiple functions, including over-rise alarm, overload protection, power-off protection, parameter memory, call recovery, etc.
7. With loop self-diagnosis function, it can alarm Sensor fault and upper and lower limit overtemperature.
8. Using intelligent defrosting technology, equipped with brand Compressor (Air-Cooled closed Compressor).
9. Humanized design, the rear panel can be opened for easy observation and maintenance.
Principle
The light Chamber sets temperature, light and time parameters through a 30-segment LCD program controller. According to the setting, the system controls stainless steel heating tube heating or Air-Cooled closed Compressor (using R134A refrigerant) cooling, and through the turbo centrifugal fan forced convection, the air in the box is circulated to reach the set Temperature uniformity. The lighting system provides 4-sided uniform light, and the light intensity can be adjusted in six levels. During operation, the controller continuously monitors the temperature in the box (through PT100 Sensor), and has functions such as automatic defrosting, program stepping, and security alarm to achieve a stable foster environment.
Applications
Plant fostering, seed germination, microbial fostering, tissue fostering, environmental testing, scientific research experiments
Standards
No specific compliance criteria were mentioned in the data.
Steps
1. Connect the AC 220V power supply.
2. Set the temperature, light intensity and time program (up to 30 segments) by tapping the button.
3. Select the operation mode, such as fixed-value operation, regular operation, or program operation.
4. Start the equipment, the equipment will automatically run according to the set program, including heating, cooling, lighting and timing waiting.
5. During operation, the real-time temperature and set temperature can be monitored through the LCD screen.
6. After the program runs or reaches the set time, the device can automatically stop.
Notice
* Power supply voltage is AC 220V, rated current 5.0A.
* Equipment should be placed in a stable, well-ventilated environment.
* Please confirm that the liner is clean before operation, and the shelf load should not exceed 15kg.
* Do not block the rear panel and ventilating port of the equipment.
* If there is an alarm message (such as over-rise alarm, Sensor failure), please check the fault in time.
The device is equipped with a menu lock function to prevent incorrect operation.
The device has a power-off protection function, and can continue to run the original program after power is restored, but it is recommended to check the set parameters regularly.
* Please disconnect the power supply when cleaning, wipe with a soft cloth, and avoid the use of corrosion cleaners.
