Please contact customer service
4-Sided lighting six adjustable, Illumrination degree 0-20000Lx, to ensure uniform rays of light; 30-segment LCD program control, support setting, timing, program operation and other modes, easy to operate and with power-off protection, self-diagnosis and other safety functions.
Category : Incubator
Brand : TaiSiTe
SKU : NB029173
Service :The delivery and service By NBCLab.Com
TAISITE GZX400EF light Chamber is a 400L volume laboratory equipment, using 4-sided lighting design, Illumrination degree 0-20000Lx six-level adjustable. It has precise temperature control, Temperature range 0~ 65 ℃ without humidification, 10~ 65 ℃ with humidification, Temperature resolution of 0.1 ℃, Fluctuation of +/- 1 ℃, Uniformity of +/- 1.5 ℃. The device uses 30-segment LCD program control, supports multiple operating modes, and integrates a number of safety and convenience functions.
1. Using 4-sided high luminous flux Illuminant, uniform lighting, six-level adjustable, up to 20000Lx. 2.30-Segment LCD program control, support fixed-value operation, timing operation, program operation, automatic stop and appointment start. 3. Easy to operate, equipped with dedicated function keys and auxiliary menus to achieve temperature setting, deviation correction, menu locking and other functions. 4. Adopt a turbine centrifugal forced air supply system to ensure uniform temperature in the box. 5. Safety protection: over-rise alarm, overload protection, circuit self-diagnosis, upper and lower limit over-temperature alarm, power-off protection and parameter memory. 6. Intelligent defrosting function to reduce the impact of the frost layer on the experiment. 7. Adopt brand Air-Cooled closed Compressor and environmentally friendly refrigerant R134A. 8. Humanized design, the rear panel can be opened for easy observation and maintenance.
The GZX400EF light Chamber achieves precise control of the environment in the box through forced convection. Its core Control system uses a 30-segment program to set complex temperature-time Linear dispersion. The system monitors the temperature in the box through the PT100 temperature sensor. The controller compares the set value with the measured value, drives the Compressor refrigeration or heating device (stainless steel heating pipe) to heat, and forcibly circulates air through the turbo centrifugal fan to ensure uniform and stable temperature. The lighting system provides 4-sided uniform light, and the intensity can be adjusted in six levels. The equipment has intelligent functions such as automatic defrosting, power outage memory and compensation, and fault self-diagnosis to maintain the stability and safety of experimental conditions.
Plant fostering, seed germination, microbial fostering, tissue fostering, insect feeding, environmental testing
No specific compliance criteria were mentioned in the data.
1. Connect the AC 220V power supply. 2. Set the desired temperature, light intensity and time program (up to 30 segments, Timer Range 0-99.9 hours) by tapping the button. 3. Select the operation mode: fixed-value operation, regular operation, or program operation. 4. The appointment start time can be set. 5. The device starts to work according to the set parameters, and the measured temperature and set temperature displayed on the LCD screen can be observed during operation. 6. After the operation is completed, the device can be automatically stopped.
• Power supply voltage is AC 220V, rated current 5.5A. • Net weight 81kg, gross weight 122kg, handling and placement should pay attention to safety. • When using the humidification function, the temperature setting range should be between 10 and 65 degrees Celsius. • Note that the maximum load-bearing capacity of each shelf (Shelf) is 15kg. • Please confirm that the door is closed before operation to ensure the uniformity of temperature and light. • The device has a menu lock function to prevent misoperation. • In case of alarm (such as over-lift, Sensor failure), please check and troubleshoot according to the prompts before use. • The rear panel can be opened for observation, and non-professionals should not disassemble the internal parts without authorization.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
