Overview
TAISITE MFLC-16/12D ceramic muffle furnace is a laboratory heating equipment with a maximum temperature of 1200 ° C. It adopts an all-in-one lightweight and compact design, equipped with vacuum forming polycrystalline mullite fiber furnace and special nickel-chromium-aluminum alloy heating wire for three-sided heating, combined with High Accuracy Microcomputer PID Temperature Controller and K-type Thermocouple to achieve precise temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Special alloy heating wire three heating, Temperature uniformity.
4. Open the door and power off, reset delay safety design.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, which is conducive to ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Special function key to set the temperature, easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise prevention and other functions.
10. Parallel side open furnace door design keeps the hot end away from the operator.
11. Provide D-type (single-stage temperature control), P-type (program temperature control), T-type (Touchscreen program temperature control) and other temperature control instrument options.
Principle
The muffle furnace precisely adjusts the temperature in the furnace through a microcomputer PID Control system. The system receives the temperature signal in the furnace detected by the K-type Thermocouple, compares and calculates with the set value, and then controls the Power output of the nickel-chromium-aluminum alloy heating element to achieve a fast and stable heating and thermostatic process. Three-sided Heating mode ensures good Temperature uniformity inside the furnace.
Applications
Material ashing, sample heat treatment, laboratory high temperature sintering, material annealing, ceramic firing, metal heat treatment, chemical analysis
Standards
No specific compliance criteria were mentioned in the data.
Steps
Connect the power supply (AC220V/27.3A 50/60Hz).
2. Set the target temperature and time parameters by tapping the button or Touchscreen (depending on the model).
3. Start the device and start heating up.
4. The equipment runs according to the set program, and may automatically stop or enter the heat preservation after reaching the set time.
5. After the operation, wait until the furnace temperature drops to a safe range before opening the furnace door to remove the sample.
6. After use, turn off the power.
Notice
When the equipment is running and just after the furnace body is high temperature, do not touch it, and ensure that the furnace door is closed.
* The power will be automatically cut off when opening the door, and there will be a delay in the return of power. Please pay attention to safety.
Do not exceed the maximum temperature limit of 1200 ° C.
* Do not heat flammable, explosive or toxic gases in the furnace.
* The equipment should be placed on a well-ventilated and stable countertop, away from flammable materials.
* Regularly check the Power Cord and Equipment Appearance to ensure no damage.
Non-professionals should not disassemble or modify the internal structure of the equipment.
* Please pay attention to the weight (gross weight 86kg) when handling, and handle it with care.
