Overview
TAISITE MFLC-36/12T ceramic muffle furnace is a laboratory high temperature equipment with a maximum operating temperature of 1200 ° C. It adopts integrated design, light and compact structure, furnace volume is 36L, equipped with 7-inch color Touchscreen program temperature control instrument, controlled by microcomputer PID, temperature control accuracy can reach +/- 1 ° C.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace effective insulation, special alloy heating wire three heating provides good Temperature uniformity.
3. Open the door and power off, and the reset is delayed to ensure safety.
4. Double shell air insulation, low surface temperature.
5. Exhaust device, conducive to ashing.
6. High Accuracy Microcomputer Temperature Controller and Precision Sensor are well combined for accurate temperature.
7. Dedicated function keys to achieve temperature setting.
8. Auxiliary menu, realize over-rise alarm, deviation correction, menu lock, over-rise preventer.
9. Safety: over-rise alarm, menu lock, over-rise prevention, power failure when opening the door, and delay when restarting.
10. Parallel side-opening furnace doors to keep the hot end away from operation.
Principle
The muffle furnace adopts microcomputer PID control technology, monitors the temperature in the furnace in real time through K-type Thermocouple Sensor, and feeds the signal back to the temperature controller. The temperature controller precisely adjusts the Power output of the nickel-chromium-aluminum alloy heating element according to the setting program or fixed value, and realizes three-sided heating to ensure uniform temperature in the furnace and accurate control.
Applications
Material ashing, heat treatment, high temperature sintering, laboratory analysis
Steps
1. Connect the AC380V power supply.
2. Set the temperature program or setting parameters through the 7-inch color Touchscreen.
3. Start the equipment to start heating operation.
4. Linear dispersion can be observed in real time through the screen during operation.
5. After the experiment, the USB flash drive data can be exported.
6. After the furnace body is chilled down, open the parallel side open furnace door to take lofting samples.
Notice
Equipment needs to use AC380V power supply and ensure good grounding.
• Automatically power off when opening the door. After re-closing the door, it needs to be delayed to restore power. Please pay attention to operation safety.
• There may still be residual temperature on the surface of the furnace body, please pay attention to avoid burns during operation.
• Do not make unnecessary parameter modifications or touch the heating parts when the equipment is running.
• Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
• When using the vent function, make sure to ventilate well.
