Overview
TAISITE MFLC-8/13T ceramic muffle furnace is a high temperature heating equipment with integrated lightweight and compact design. It uses silicon carbide rod as heating element, the maximum temperature can reach 1300 ℃, Temperature range 300~ 1300 ℃, furnace volume is 8L, using 7 inch color Touchscreen for programmed temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Temperature Controller Combined with S-type Thermocouple Precision Sensor, the temperature control accuracy reaches +/- 1 ℃.
8. Realize temperature setting through dedicated function keys or Touchscreen.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. High safety, integrated with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The device uses microcomputer PID control technology to accurately detect the temperature in the furnace through the S-type Thermocouple Sensor, and feeds the signal back to the 7-inch color Touchscreen programmable temperature controller. The temperature controller precisely controls the Power output of the silicon carbide heating element according to the setting program or fixed value, achieving fast and stable temperature rise and thermostatic, and the time required to heat up to 1300 ° C does not exceed 30 minutes.
Applications
Material ashing, high temperature heat treatment, material sintering, laboratory analysis
Standards
The data did not mention specific compliance criteria.
Steps
Connect the power supply (AC220V/18.2A 50/60Hz).
2. Set the target temperature or select the preset program by tapping the 7-inch color Touchscreen.
3. Set the timing time (0 to 999.9 hours).
4. Start the equipment to start heating operation.
5. Linear dispersion of real-time temperature can be viewed through Touchscreen during operation.
6. After the experiment, the data records can be exported using the USB flash drive.
7. Turn off the power.
Notice
• Please pay attention to the status of the furnace door when operating. When opening the door, the power will be automatically cut off to ensure safety.
• The surface of the device may heat up, do not touch the case while running.
• Power supply voltage and equipment Rated voltage (AC220V) match.
• The equipment is heavy (Net weight 60kg), so pay attention to safety when moving.
• When using the vent function, make sure to ventilate well.
• Regularly perform temperature correction to ensure temperature control accuracy.
• Do not make unnecessary parameter modifications while the device is running, use the menu lock function.
• The equipment is equipped with an overcurrent leakage protection switch. In case of tripping, please check the line and load.
