Overview
TAISITE MFLC-36/13T ceramic muffle furnace is an all-in-one laboratory high temperature equipment with a maximum Operating temperature of 1300 ° C. The product furnace volume is 36L, using polycrystalline mullite fiber furnace and silicon carbon rod heating elements, and 7-inch color Touchscreen programmable temperature controller to achieve High Accuracy Temperature Control and Convenient Operation Experience.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer PID Thermocouple combined with S-type Thermocouple, temperature control accuracy of +/- 1 ℃.
8. Adopt 7-inch color Touchscreen, light point setting through finger touch, intuitive and convenient operation.
9. With real-time Linear dispersion recording, U disk data export and other auxiliary features.
10. Multiple safety devices, including over-lift alarm, menu lock, over-lift prevention, door opening and power failure, reset delay and over-current and leakage protection switch.
Principle
The muffle furnace generates heat through a silicon carbide heating element, and the heat is evenly distributed in the furnace composed of polycrystalline mullite fibers. The vacuum forming structure of the furnace effectively reduces heat loss. The temperature control is completed by a microcomputer PID controller, which receives the real-time furnace temperature signal detected by the S-type Thermocouple, and compares and calculates with the target temperature set by the user. By adjusting the power output of the heating element, fast and stable temperature control is achieved, with an accuracy of +/- 1 ° C.
Applications
Laboratory sample ashing, material high temperature treatment, heat treatment experiment, ceramic sintering, metal annealing, Glass process, chemical analysis
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the AC380V power supply.
2. Set the target temperature, heating program or timing parameters through the 7-inch color Touchscreen.
3. Start the heating, the equipment will run automatically according to the set program.
4. Linear dispersion can be observed in real time through Touchscreen during operation.
5. After the experiment is completed, the data can be exported to the USB flash drive.
6. After the furnace body is chilled down, clean and maintain it.
Notice
• The device needs to use AC380V power supply, rated current 21.3A, please make sure the power supply matches.
• The surface of the furnace body may be high temperature, so pay attention to preventing burns during operation.
• When opening the door, the equipment will automatically power off. After closing the furnace door, it needs to be restarted after a delay. Please follow this safety mechanism.
• Do not heat flammable, explosive or toxic gases in the furnace.
• Regularly check whether the exhaust hole is unobstructed.
Before moving or maintaining equipment, be sure to disconnect the power supply.
• Please install and repair by professionals.
