Overview
TAISITE MFLC-3/14D is a ceramic muffle furnace with a maximum Operating temperature of 1400 ° C and a Temperature range of 300~ 1400 ° C. The product adopts an integrated design, lightweight and compact structure, with a furnace volume of 3L and a Heating power of 3KW. It is equipped with a High Accuracy Microcomputer PID Thermocouple and S-type Thermocouple, with a temperature control accuracy of +/- 1 ° C and a Temperature resolution of 1 ° C.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Adopt a parallel side open furnace door design to keep the hot end away from the operator and reduce the occupied space.
4. It has the function of opening the door and power failure and recharging delay to enhance safety.
5. Double shell air insulation and multi-point heat dissipation design, low surface temperature.
6. Equipped with an exhaust device, which is conducive to ashing.
7. High Accuracy Microcomputer Thermostat Combined with Precision Sensor for Accurate Temperature.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Multiple safety designs: over-rise alarm, menu lock, over-rise prevention, door opening and power failure, restart delay, over-current and leakage protection switch.
Principle
The muffle furnace uses silicon carbide rods as heating elements, and precisely adjusts the Heating power through a microcomputer PID Control system. The system monitors the furnace temperature in real time through S-type Thermocouple, and feeds back the signal to the temperature controller. The temperature controller performs PID operation according to the deviation of the set value and the actual value, and outputs the control signal to maintain the stability of the temperature in the furnace. The furnace adopts polycrystalline mullite fiber material and cooperates with the double shell air insulation structure to effectively reduce heat loss.
Applications
Material ashing, sample sintering, heat treatment, laboratory high temperature experiment
Standards
The data did not mention specific compliance criteria
Steps
Connect the power supply (AC220V/13.6A 50/60Hz).
2. Set parameters such as temperature and time by touching the five buttons on the thermostat.
3. Start the equipment to start heating operation.
4. After the operation, the equipment will cool down or stop heating according to the set procedure.
5. After the furnace temperature has dropped to a safe range, the sample can be removed by opening the furnace door.
Notice
When the equipment is powered on and running at high temperatures, do not touch the furnace body to prevent burns.
* When opening the door, the device will automatically power off. After closing the furnace door, it will take a delay to power back. Please do not force the operation.
* Do not heat flammable, explosive, volatile and corrosive gases in the furnace.
* Please ensure that the exhaust hole is unobstructed when using.
* Equipment should be placed in a smooth, well-ventilated environment.
Non-professional personnel should not disassemble or modify the equipment.
Regularly check whether the power cord and electrical components are in good condition.
When not in use for a long time, please disconnect the power supply.
