Overview
The TAISITE MFLC-8/14D ceramic muffle furnace is a laboratory heating device with a maximum temperature of 1400 ° C. It features an all-in-one, lightweight and compact design, a vacuum-formed polycrystalline mullite fiber furnace and silicon carbide rod heating elements, combined with a High Accuracy microcomputer PID thermometer and S-type Thermocouple for precise temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design saves space and keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor, Temperature control accuracy up to +/- 1 ℃, Temperature resolution 1 ℃.
8. Special function key to set the temperature, easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise prevention and other functions.
10. High safety, integrated with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay when restarting.
11. Adopt swing door design to reduce occupancy.
12. With multi-point heat dissipation design.
Principle
The muffle furnace generates heat through the internal silicon carbide rod heating element to heat the furnace. The microcomputer PID temperature controller receives the temperature signal in the furnace detected by the S-type Thermocouple, compares and calculates with the set value, and precisely controls the output of Heating power, so as to realize the rapid, stable and accurate adjustment of furnace temperature, and can operate thermostatic for a long time within the set range.
Applications
Material sintering, ashing experiment, heat treatment, laboratory high temperature heating
Standards
The data did not mention specific compliance criteria
Steps
1. Turn on the power supply.
2. Set parameters such as target temperature and time by tapping the button on the thermostat.
3. Start the heating procedure and the furnace body starts to heat up.
4. After the heating or thermostatic process, open the furnace door to remove the sample after the furnace temperature drops to a safe range.
5. Turn off the power after use.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• When the furnace body is working and just after the work, the surface may be high temperature, do not touch, pay attention to burns.
• When opening the door, the device will automatically power off. After closing the furnace door, there will be a delay in recharging. Please wait for the system to recover.
Do not operate beyond the maximum operating temperature of the device (1400 ° C).
• Use special tools and wear protective gear when inserting or removing samples.
• Regularly check whether the electrical circuits and safety devices (such as overcurrent and leakage protection switches) are normal.
• Do not put flammable or explosive items in the furnace or react with the furnace material.
• The equipment is equipped with a vent, please ensure that it is unobstructed to facilitate the discharge of volatile matter.
• Before moving or maintaining equipment, be sure to disconnect the power and make sure the furnace is completely chilled down.
