Overview
The TAISITE MFLC-3/14P ceramic muffle furnace is a high temperature experimental equipment with a maximum temperature of 1400 ° C. It is an all-in-one lightweight and compact design, equipped with a vacuum-formed polycrystalline mullite fiber furnace and silicon carbide rod heating elements, combined with a High Accuracy microcomputer PID temperature controller and S-type Thermocouple, to achieve precise temperature control (temperature control accuracy +/- 1 ° C).
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side-opening (swing-open) furnace door design to reduce the space occupied and keep the hot end away from the operator.
4. It has the safety function of opening the door and power failure, and restarting the power delay.
5. Double shell air insulation, low surface temperature, and multi-point heat dissipation design.
6. Equipped with an exhaust device, it is conducive to experimental processes such as ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor, Temperature Accuracy, Temperature resolution 1 ℃.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Multiple safety designs: over-rise alarm, menu lock, over-rise prevention, door opening and power failure, restart delay, over-current and leakage protection switch.
Principle
The muffle furnace generates heat through the silicon carbide heating element, and the microcomputer PID controller compares and calculates the actual temperature in the furnace according to the S-type Thermocouple detected with the target temperature set by the user, and automatically adjusts the Heating power to achieve precise control of the furnace temperature. Its polycrystalline mullite fiber furnace can effectively reduce heat loss and ensure uniform and stable temperature in the furnace.
Applications
Material ashing, high temperature sintering, heat treatment, laboratory analysis
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the power supply (AC220V).
2. Set parameters (e.g. temperature, time) by tapping the five buttons.
3. Select the running mode (fixed-value running or program running).
4. Start the equipment to start heating.
5. After the experiment, wait until the furnace temperature drops to a safe range before opening the furnace door.
6. Turn off the power.
Notice
When the equipment is running and just after the furnace body is high temperature, do not touch it, beware of burns.
* When opening the door, the device will automatically power off. There will be a delay in repowering after closing the furnace door. Please pay attention to safety.
* Do not heat flammable, explosive or corrosive gases in the furnace.
Please ensure that the exhaust hole is unobstructed before use.
* Equipment should be placed in a smooth, well-ventilated environment for use.
Please check the power cord and electrical parts regularly to ensure safety.
Non-professional personnel should not disassemble or modify the equipment.
Please pay attention to safety when handling to avoid collisions.
