Overview
The TAISITE MFLC-36/14P ceramic muffle furnace is a high temperature experimental equipment with a maximum temperature of 1400 ° C. It is an all-in-one lightweight and compact design, equipped with a vacuum-formed polycrystalline mullite fiber furnace and silicon carbide rod heating elements, combined with a High Accuracy microcomputer PID temperature controller and S-type Thermocouple for precise temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design saves space and keeps the hot end away from the operator.
4. It has the safety function of opening the door and power failure, and restarting the power delay.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor, Accurate Temperature Control, Temperature resolution up to 1 ℃.
8. Special function key to set the temperature, easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise prevention and other functions.
10. Multiple safety designs: over-rise alarm, menu lock, over-rise prevention, door opening and power failure, restart delay, over-current and leakage protection switch.
Principle
The muffle furnace generates heat through a silicon carbide heating element, and the heat is evenly distributed in the furnace composed of polycrystalline mullite fibers. The temperature control is completed by a microcomputer PID controller, which receives the actual temperature signal in the furnace detected by the S-type Thermocouple, compares and calculates the temperature set by the user, and realizes the precise control and stability of the temperature in the furnace by adjusting the Heating power output.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Standards
No specific compliance criteria were mentioned in the data.
Steps
1. Connect the AC380V power supply.
2. Use touch buttons or digital display to set target temperature, program Linear dispersion or timing parameters.
3. Start running (fixed-value running or program running).
4. Equipment according to the set program heating, insulation.
5. After the experiment, wait for the furnace temperature to chill down naturally or operate according to the procedures.
6. Auxiliary operations can be performed through correction functions, gating functions, etc. (D/P/T type functions are slightly different).
Notice
* The power supply of the equipment is AC380V, make sure that the power supply matches and install an overcurrent and leakage protection switch.
Maximum operating temperature is 1400 ° C. Do not operate over temperature.
* When opening the door, the device will automatically power off. There will be a delay in repowering after closing the furnace door. Please pay attention to safety.
The surface of the furnace body may still have residual temperature, and burns should be prevented during operation.
* When using the vent, pay attention to ventilating and safety.
* When setting programs or operating functions, please refer to the instrument instructions for specific models (D-type, P-type, T-type).
* Device weight up to 100kg (gross weight 115kg), handling and installation should pay attention to safety.
Regularly check the effectiveness of safety devices such as overlift preventers.
