Overview
The TAISITE MFLC-36/14T ceramic muffle furnace is a high temperature experimental equipment with a maximum temperature of 1400 ° C. It features an all-in-one lightweight and compact design, a polycrystalline mullite fiber furnace, silicon carbide heating elements, and a 7-inch color Touchscreen programmable temperature controller with temperature control accuracy of +/- 1 ° C. It is suitable for a variety of high temperature processing applications.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Adopt a parallel side open furnace door design to reduce the footprint and keep the hot end away from the operator.
4. It has the function of opening the door and power failure and recharging delay, which enhances the operation safety.
5. Double shell air insulation and multi-point heat dissipation design, low surface temperature.
6. Equipped with an exhaust device, which is conducive to processes such as ashing.
7. High Accuracy Microcomputer PID Temperature Controller Combined with S-type Thermocouple Precision Sensor, Accurate Temperature Control, Temperature resolution 1 ℃.
8. Equipped with a 7-inch color Touchscreen, you can set the temperature and program by tapping the finger.
9. With rich auxiliary features, including correction function, gating function, real-time Linear dispersion recording, U disk data export, 0~ 999.9 hours timing, program operation (50 steps), etc.
10. Multiple safety designs: over-lift alarm, menu lock, over-lift prevention, door opening and power failure, reset delay and over-current and leakage protection switch.
Principle
The muffle furnace generates heat through the silicon carbide heating element, and the microcomputer PID controller compares and calculates with the target temperature or program Linear dispersion set by the user according to the actual temperature detected by the S-type Thermocouple, and precisely adjusts the Heating power to achieve precise control of the temperature in the furnace. Its polycrystalline mullite fiber furnace can effectively reduce heat loss and ensure Temperature uniformity and Stability.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Standards
No specific compliance criteria were mentioned in the data.
Steps
1. Connect the AC380V power supply.
2. Set the target temperature or select the preset program by tapping the 7-inch color Touchscreen.
3. Set the timing time (if necessary).
4. Start the device and start heating up.
5. Linear dispersion can be observed in real time through Touchscreen during operation.
6. After the experiment is completed, the data can be exported to the USB flash drive.
7. When opening the door, the equipment will automatically power off. After closing the furnace door, it is necessary to delay the power-back.
Notice
The equipment needs to use an AC380V power supply and ensure reliable grounding.
Please pay attention to high temperature during operation to avoid burns. When the furnace door is opened, the hot end should be kept away from the operator.
* When the furnace door is opened, the device will automatically power off, and after closing, you need to wait for the end of the reset delay.
* Do not heat flammable, explosive or toxic gases in the furnace.
Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
* Although there are resistant paintings on the surface of the equipment, contact with corrosion chemicals should still be avoided.
* Device weight (gross weight 115kg) when moving or installing.
