Overview
TAISITE MFLC-8/14T ceramic muffle furnace is a high temperature experimental equipment with a maximum temperature of 1400 ° C. It adopts an all-in-one lightweight and compact design, the furnace volume is 8L, equipped with a High Accuracy microcomputer PID Control system and a 7-inch color Touchscreen, supports program operation and data export functions.
Features
1. Integrated lightweight and compact design.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design, hot end away from the operator, saving space.
4. It has the safety function of opening the door and power failure, and restarting the power delay.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller combined with S-type Thermocouple, temperature control accuracy of +/- 1 ℃.
8.7 inch color Touchscreen, support finger touch light point setting.
9. With correction function, gating function, real-time Linear dispersion recording, U disk data export and other ancillary functions.
10. Multiple safety designs: over-lift alarm, menu lock, over-lift prevention, door opening and power failure, reset delay and over-current and leakage protection switch.
Principle
The muffle furnace uses silicon carbide rod as the heating element, and generates high temperature under the precise control of the microcomputer PID controller. The controller receives the temperature signal in the furnace detected by the S-type Thermocouple, and dynamically adjusts the Heating power through the PID algorithm to achieve fast and stable heating and thermostatic control. The furnace adopts polycrystalline mullite fiber material and cooperates with the double shell air insulation design to effectively reduce heat loss.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Standards
The data did not mention specific compliance criteria.
Steps
1. Turn on the power supply and turn on the power switch of the device.
2. On the 7-inch color Touchscreen, set the target temperature or select the preset program by tapping the finger.
3. Set the timing time (0 to 999.9 hours).
4. After confirming that the parameters are correct, start the heating procedure.
5. During the heating process, the real-time temperature Linear dispersion can be observed through the screen.
6. After the experiment, wait for the furnace body to chill down naturally or cool down according to the program.
7. If you need to save the data, you can export the records through a USB stick.
8. Turn off the power switch and disconnect the power.
Notice
• When the equipment is powered on or running, do not open the furnace door, it will automatically power off when opened.
• The furnace body is at high temperature, and protective equipment needs to be worn during operation to avoid burns.
• Do not heat flammable, explosive or toxic gases in the furnace.
• The equipment should be placed on a well-ventilated and stable countertop for use.
• Regularly check the power cord and electrical parts to ensure that there is no damage or leakage.
• The furnace should be kept clean to avoid sample residues affecting the life of the heating element.
• Non-professionals should not disassemble or repair the internal parts of the equipment.
• Be careful when moving equipment to avoid collision damage to the furnace or housing.
